User’s Manual
37
WMM – Power Save Enable:
Enable WMM power saving mode to save energy and lets your battery live longer. Click
this button to select the WMM data type which will suppress the function of power saving.
When this kind of data is transferring, power saving function will be disabled. Available data
types are AC_BK (Background / Low Priority), AC_BE (Best Effort), AC_VI (Video First),
and AC_VO (Voice First).
Direct Link Setup Enable:
Enable or disable direct link setup (DLS) function. This function will greatly improve the
data transfer rate between WMM-enabled wireless devices. Please click ‘Apply’ button on
the right of this check box after you check or uncheck this box, so corresponding settings in
this window will be activated or deactivated respectively.
MAC Address:
Input the MAC address of another WMM-enabled wireless device you wish to establish a
direct link here, then click ‘Apply’ to add this MAC address to DLS address table.
Timeout Value:
Input the timeout value of this WMM-enabled direct link wireless device. If the wireless
device is not responding after this time, it will be removed from DLS table.
Tear Down:
If you want to remove a specific wireless device from DLS table, select the device and click
this button to remove it.
After you finish the settings, click ‘Apply’ to close configuration utility.
