User’s Manual
41
WPS Setup - PIN
If the wireless access point you wish to connect supports PIN, please follow the following
instructions to establish connection to it:
1. Right-click the Ralink configuration utility icon located at lower-right corner of computer
desktop, then click ‘Launch Config Utilities’.
2. Click ‘WPS Configuration’ tab, and the following settings will appear:
The PIN number of your wireless network card is an eight-digit number located at the
upper-right position of configuration utility. Remember it, and input the number to your
wireless access point as the WPS PIN code (Please refer to the user manual of your
wireless access point for instructions about how to do this).
3. Click ‘PIN’ button now, and wait for few seconds to one minute. If a wireless access point
with correct PIN code is found, you’ll be connected to that access point:
