Galaxy G6
- 9 -
Display and main interface
Power on G6 and after initializing, it will get into the main interface and begin to search the
satellite like a radar on skyplot, then you will get a voice saying the working mode, 10 seconds
later the screen will automatically switch to display the coordinates and other information.
The satellite information will display on this interface such skyplot, the number of satellite and
PDOP status
Coordinates page
Skyplot page
Ref
Component
Description
①
Battery symbol
Display the electricity quantity in real-time
②
Coordinates
Display the coordinates of base or rover
③
Solution/Message type
It will display the message type transmitted when the
receiver is set as base; and it will display the solution type
when the receiver works as rover
④
Message symbol
The message symbol will appear automatically if receiver
gets something error, such as error message. Press F key
to read the message and press F key again to cancel
⑤
Temperature
Display the temperature of receiver in real-time
⑥
WiFi symbol
Display the WiFi status, when it shows
, that
①
③
⑤
②
⑥
⑧
⑦
④
