Galaxy G6
- 13 -
What we should do in the next is setup all the parameters for static mode. Press power key once
and enter Record Option page, all the parameter items are displayed here including point name,
antenna height, sample interval, record mode and data type.
Site:
this is point ID for static, and it is the last 4 digits from serial number, but you can edit it if
you choose this item, there are 0-9 and A-Z for each digit.
Ant.Hgt:
This is the antenna height measure from ground point to measurement tape
Interval:
This is the sample rate for raw data storage
Rec.Mode:
This is used to configure receiver to store raw data automatically or manually if
achieve sampling condition
DataType:
This is used to choose the data format for raw data storage, such as STH, Rinex2.01
and Rinex3.02
Press F key to move to
Edit
option and press power key to confirm, here you can select the item
to edit by pressing F key. For example, press F key to move to Datatype item and press power
key to setup what kind of data format we are going to record, press F key to move to Rinex2.x or
Rinex3.x and press power key to confirm, after that, press F key to move to OK option and press
Power key to finish setting and return to the coordinate/skyplot page.
The receiver will start to record the data if achieve the sampling conditions, at this moment,
recording information will be shown on the screen such as file size, recording time and the
epochs.
File Size:
Real-time display the size of data file
Rec.Time:
Real-time display the recording time
Epochs:
Real-time display the quantity of epochs receiver already obtained
