Galaxy G6
- 46 -
NtripClient
This is the general used function for rover set in GPRS mode. At the field of NtripClient, the
specify IP address, access port of reference station, as well as the assigned username and
password shall be input for the NTRIP connection.
Status:
This field will display the status of NTRIP connection, connect or disconnect.
Active:
Check on this circle to activate this function.
Authentication Mode:
These two modes use different protocol standard for the connection,
Eagle Mode is SOUTH standard mode, and TCP/IP Mode is for private network use, usually,
choose the Eagle mode for the default setting.
The next fields are the standard configuration for NTRIP connection, IP, port, username and
password, after these information is input into the corresponding field, click on Get Point button
to download the source table from server, then choose a proper mountpoint to access.
