Galaxy G6
- 88 -
Using internal Web UI
1)
Connect Galaxy G6 with computer via 7-pin to USB cable and set the USB port to output
as Ethernet on G6. (a driver is required to installed on computer to enable this function).
2)
Login the internal Web UI of G6 with the default username and password (admin/admin).
3)
Get into
General Config interface under Configuration ;
4)
Choose Base in Work Mode and Radio for Datalink , then click Enter button to
save configurations;
5)
Get into Base Setup interface, and input known coordinates or click Position button to
obtain a single coordinates for base station;
6)
Choose the correction format in Corrections , then click StartBase button to start the
base station.
