Galaxy G6
- 37 -
CMR ID/RTCM2.X ID/RTCM3.X ID:
Users can specify the ID for transmitting correction.
Position:
Click this button to capture the coordinates for current position
Spare:
This is used to the repeat station
Base Start Mode:
Here contains 3 methods to start the Base, manually start base, automatically
start base by fixed point, automatically start base by current point.
Correction:
Here contains the global general used correction formats including RTD,RTCM23,
RTCM30, RTCM32, CMR and SCMRx
POP Value:
This value is setup for the PDOP limitation.
Status:
Here will display the status for base in real-time.
Antenna Setup
The antenna parameters are configured in this page including the antenna height, measuring
method.
Antenna Height:
This is the value for height of antenna while surveying.
Measuring Method:
Here provides several methods for measuring the antenna height such as
carrier phase center, slant height, antenna edge, height plate and to the bottom.
Satellite Tracking
In this page, users can define the mask angle for satellite tracking, and check on the box of
corresponding band from the constellation that to use this band or not