Galaxy G6
- 108 -
Tilt Surveying
After finishing the calibration for sensors, you can start tilt survey with Galaxy G6 in the tough
conditions such as under the eave or around the wall, this function can correct the slant
coordinates to the normal coordinates within 30° angle of inclination.
SPECIAL REMIND: We recommend you to do the measurement in usual way with the
pole centering in the open air area, the tilt survey function is not the mainly
measuring method for the normal fieldwork.
§7.2.6 Radio Router
This feature is used to transfer the correction which from the reference station for the other rover
by radio, the rovers will have the same coordindates from the reference station.
NOTE: This function should be used under Rover+Network mode.
Before configuring on this function, go to Radio Parameters interface to check which radio
channel value and what kind of protocol are being applied, please keep in mind on this channel
value and protocol that are selected to match on rovers later on.
Then choose Network for Datalink option and choose internal radio for Router option in
General Config page, click on Enter button to confirm the settings.
At this moment, configure the parameters for rover to access to the CORS server for corrections.
(Please refer to 7.2.3)
Then the other rovers are able to connect the rover router via internal radio with the same
channel value, after rovers have fixed solution, the base coordinates are same as CORS station.
