Galaxy G6
- 17 -
Press F key to get into main configuration interface after the initialization or the working mode
has been setup, then move the select box to Set Data Link option by pressing F key, and press
power key to confirm and enter the interface, there are UHF, Cellular Net, Bluetooth, Dual
Transmitting, WIFI Datalink, External, Close Datalink and Main menu options displayed on this
interface.
UHF Setting
Select UHF option and then get into its configuration interface, then you can setup the channel,
air baud rate, communication protocol and power for internal UHF.
Channel:
This is the communication channels for internal UHF, the value of the channel must
be the same both in Base and Rover.
Air Baud:
This represents the radio transmission rate of data, the higher value, the bigger of
data size transmitted per second, in this page, there are 9600 and 19200 for selection. The default
setting is recommended to use, Base and Rover must have the same rate if it is changed.
