Galaxy G6
- 29 -
Chapter
Ⅲ
Web UI Configuration
§3.1 Overview
Because of using the smart embedded Linux operating system and SOUTH intelligent cloud
technology, Galaxy G6 is allowed to configure and monitor the status of itself in real-time on
web UI. G6 supports to access its web UI via its broadcasted WIFI hotspot and USB mode.
WIFI mode
First of all, get into WIFI Config option to open the WIFI hotspot by choosing AP option in
WIFI Option.
Then use smartphone, tablet or laptop to connect the WIFI hotspot (SOUTH_xxxx) and input the
default IP (10.1.1.1) into explorer, input the default username and password for login.
USB mode
First of all, choose the Ethernet option
in S stem Option
Other option
USB Mode to make
the 7-pin port be an ethernet port, then connect G6 with computer via USB cable. Run the IE
explorer and type IP 192.168.155.155 into IP address bar, then input the default username
(admin) and password (admin) for login.
NOTE: install the corresponding driver to activate this function, the driver can be downloaded
from official website.
Remote Login
If users would like to remote login the web UI of G6, then G6 has to connect to the internet and
forward its 80 port to the public network. For example, if the IP address 222.196.35.76 is the
public network IP which G6 has connected, and the 80 port of G6 has been bounded with 8000
in public network, then users can input the public network IP address into IE explorer along with
the forwarding port for login. (http:// 222.196.35.76:8000)
NOTE: please use the IE explorer for the Web UI login.
In this chapter, we will take using the WIFI hotsopt to login the Web UI for example.
Open the WIFI hotspot of G6 then search the SSID with computer. Then connect the WIFI
hotspot from G6.
