Galaxy G6
- 12 -
§2.2 Operation on receiver
§2.2.1 Main configuration page
Press once on F key after power on receiver to get into the configuration interface, then you will
have Mode Select, Set Datalink, System Option, WIF Config, UHF Info, Config Mode, Power
Off and Quit.
Press F key to move the box to the option which you need to configure, and then press Power
key to confirm your selection.
§2.2.2 Mode Select
Power on receiver and press F key to get into main configuration interface, move the select box
to Mode Select option, press Power key to confirm and enter Mode Select page, there you will
have Static Mode, Base Mode and Rover mode.
Static Mode Setting
To make a static job with Galaxy G6, first you have to set the receiver in Static mode.
Get into the Mode Select page and place the select box at the Static Mode (first item), then press
Power key to confirm and return to Coordinate/Skyplot page
