Galaxy G6
- 14 -
NOTE: Please ensure the parameter values static mode are the same if there are more
than 2 pcs units work at the same time.
Base Mode Setting
Press F key after initialization to get into configuration interface, then move select box to Mode
Select option and press Power key to enter Mode Select page, move the select box to Base Mode
(second item) and press Power key to confirm. Once return to coordinate/skyplot page, press
power key to enter Base configuration page. Start Base Option, Record Option and Quit option
are displayed in this page.
Start Base Option
This option is to control and setup the parameters for the transmission when base station
achieves the transmitting conditions.
Base Mode:
Manual, Repeat and AutoBase for optional to start the base station.
