◇
22
4.2.2 System Environment Parameters Setting
Operation Instructions:
1.
Press [SYSTEM] to enter the system setting interface shown in Figure 4-2.
2.
Press [F2] key to enter the environment-related system settings shown in Figure 4-8.
3.
Press [▲], [▼] to move the cursor to the parameter to be set. Change parameter settings via
F1~F5 keys or numeric keys.
4.
Use the [F6] softkey to save your changes.
The environment related parameter settings in the System settings are shown in Figure 4-8:
Figure 4-8 system environment parameter settings
Item
Range
Default
Explanation
Key Vol
ON/OFF
OFF
Set the key sound volume to ON or OFF.
Language
Chinese/English
Chinese
Set Chinese or English Display.
Beep Vol
Off/Low/Mid/High High
Adjust the buzzer volume.
UnLock
Manual/Bus
Manual
Set the key lock, manual setting or bus
control.
Pass Vol
OFF/ON
ON
Set the PASS beep to ON or OFF.
LCD Bri.
1~10
5
Adjust the screen brightness.
Fail Vol
OFF/ON
ON
Set the FAIL beep to ON or OFF.
Date Set
Set the year, month and day as needed.
Time Set
Set 24-hour time as needed.
Table 4-2
Key lock can be controlled by manual control and bus control. Manual control is as follows:
a)
On the non-TEST page, ie. SYSTEM or SETUP interface, press [STOP] key to enter the
interface shown in Figure 4-9.
F1
系
统
设
置
中
测
试
相
关
参
数
设
置
如
图
4-2
所
示
1
系
统
设
置
中
测
试
相
关
参
数
设
置
如
图
4-2
所
示
co
F2
c
cco
m
F3
co
m
