Mounting the Antenna Brackets
1.
Remove the bracket screw hole protective covers:
Using the 1.5 mm allen key to unscrew the two protective covers
from each Nexus side panel. Put the protective covers in a safe place should you need to reinstall them at a future time.
2.
Installing the adjustable antenna brackets:
a.
Position the adjustable bracket assembly (with fitted SMA to SMA cable) on the Nexus side panel such that the
¼” screw aligns with the screw hole near the front of the Nexus.
b.
Use the 3/32” mm allen key to screw in the ¼” bracket screw so that it loosely holds the bracket in place.
c.
Adjust the lateral position and angle of the bracket to your preference, then tighten the bracket screw.
d.
Adjust the position of the cable clamp so that it aligns with the side panel screw hole near the rear of the Nexus.
e.
Use the 2 mm allen key to tighten the cable clamp.
f.
Connect the SMA cable to the nearest rear panel 2.4 GHz SMA port.
g.
Repeat above procedure for the other side’s antenna bracket.
A20-Nexus
User Guide
57
