b.
Using the 1/16” allen key, secure the mounting plate by screwing the four allen screws into screw holes (1)
c.
Reattach the Quick Release mechanism. Squeeze both the rear red release levers and locate the quick release
mechanism so that the multi-pin connector mates with the expansion port on the A20-Nexus. Firmly press down
and ensure the quick release mechanism is flush with the surface of the mounting plate.
5.
On the 8-Series, screw in the five mounting pillars.
a.
Replace three screws (2) with the three long mounting pillars.
b.
Screw in the two short mounting pillars into screw holes (3).
A20-Nexus
User Guide
53
