Use Voice Carry Over (VCO)
44
ntouch VP 8.0
Step 6.
Select the
OK
button to exit the screen.
Because the 1-Line VCO feature uses ntouch VP’s built-in audio hardware, you can make
SVRS VCO calls using just your ntouch VP. You will not need to have a separate voice
telephone for
1-Line
VCO Calls.
If you want to enable the 2-Line VCO feature instead, go on to the next step.
Step 7.
Select the
2-Line VCO
radio button as shown below.
Figure 70:
Audio Settings
screen, 2-Line VCO enabled
Notice that enabling the 2-Line VCO feature has enabled the
Callback number
field.
The 2-Line VCO feature works exactly the same as in previous firmware releases. That is,
if you choose 2-Line VCO, you must enter a Callback number and you must have a
separate voice telephone of some kind available to you near your ntouch VP.
Note:
After you enable either the 1-Line VCO or 2-Line VCO feature, all calls that you
make will be VCO calls. If you want to turn off VCO calling, you must return to the
Audio Settings screen to disable the VCO feature.
2-Line VCO option
Callback number
field
