196
Appendix/Index
The screen reacts slowly when you tap or
press keys.
･
When large amount of data is saved in the
terminal or transferring large-size data
between the terminal and microSD card,
the reactions on the screen may be
delayed.
The docomo nano UIM card is not
recognized.
･
Check if the docomo nano UIM card is
attached in the right direction.
→
P.31
The clock is not on time.
･
The clock time may become wrong when
the power is turned on for a long time.
Check if "Automatic date & time" and
"Automatic time zone" are marked and
turn the power off and on in a place with
strong radio wave conditions.
→
P.170
The terminal operation is unstable.
･
Instability may be caused by applications
that you installed after purchasing the
terminal. If the symptom is improved
when you boot the terminal in safe mode
(near default state), uninstalling the
installed application may improve the
symptom.
To boot the terminal in safe mode, press
and hold
P
for over a second with the
terminal OFF until XPERIA logo appears,
and then touch and hold the volume
down key. When safe mode is booted,
"Safe mode" is displayed at the lower left
of the screen.
To exit the safe mode, turn power OFF
and then ON.
Alternatively, with the power on, press
and hold
P
for over a second
u
Touch
and hold [Power off]
u
Tap [OK] to restart
the terminal in Safe mode.
* Back up the necessary data before using
safe mode.
* Some widgets that you created may be
removed.
* Safe mode is not a normal booting state.
To use ordinarily, exit the safe mode.
Applications cannot be operated properly
(applications cannot be activated, or
errors occur frequently).
･
Are there any applications being
disabled? Enable disabled applications,
then retry.
→
P.159
Summary of Contents for xperia z3 compact SO-02G
Page 1: ...14 10 INSTRUCTION MANUAL ...
