189
International roaming
Date & time settings
When "Automatic date & time", "Automatic
time zone" in "Date & time" are marked, the
date, time and time differences of the
terminal clock are corrected by receiving the
information related to time and time
differences from the network of overseas
network operator you connect to.
･
Correction of the time/time differences may
not be performed correctly depending on the
network of overseas network operator. In that
case, set time zone manually.
･
Timing of correction varies by the overseas
network operator.
･
Setting Date & time (P.170)
About inquiries
･
For loss or theft of the terminal or docomo
nano UIM card, immediately contact
DOCOMO from the spot to take the necessary
steps for suspending the use. For inquiries,
refer to the last page. Note that you are still
liable for the call and communication charge
incurred after the loss or theft occurred.
･
For using from land-line phone, entering
"International call access code" or "Universal
number international prefix" for the country is
needed.
When you arrive overseas and turn on the
terminal, an available network is
automatically set.
･
Check that the battery and signal levels are
high enough.
･
Depending on the network operator, even if
the Caller ID notification is active, the caller ID
may not be notified or appear properly.
In this case, calls cannot be made from the call
log.
You can make a call from overseas using the
international roaming service.
･
You can easily make international calls from
the country you stay to Japan or to other
countries by entering prefix "+" and then the
country code and phone number.
1
From the Home screen,
u
"Dial"
tab.
Making/Receiving a call in
the country you stay
Making a call to outside
country you stay (including
Japan)
Summary of Contents for xperia z3 compact SO-02G
Page 1: ...14 10 INSTRUCTION MANUAL ...
