145
Settings
Turning on Wi-Fi
1
From the Home screen,
u
[Settings]
u
Tap or drag right
of Wi-Fi.
･
It may take a few seconds before the
Wi-Fi connection is on.
❖
Information
･
Even when Wi-Fi is on, packet communication is
available. However, while you connect Wi-Fi network,
Wi-Fi comes first.
･
When a Wi-Fi network is disconnected, connection is
automatically switched to a LTE/3G/GSM network
mode. Note that packet communication charge may
be applied if network connection stays switched.
･
Turn the Wi-Fi function to off when you do not use
Wi-Fi to cut battery power consumption.
･
Make sure to receive signal strong enough for using
Wi-Fi function.
Connecting to a Wi-Fi network
1
From the Home screen,
u
[Settings]
u
[Wi-Fi].
2
Select a Wi-Fi network to connect.
･
To connect to a protected Wi-Fi
network, enter the password
u
[Connect].
･
To connect Wi-Fi network with WPS
compatible device,
or
u
[WPS
PIN Entry]. Follow the onscreen
instructions.
･
Scanning for Wi-Fi networks manually,
u
[Scan].
❖
Information
･
Depending on your environment, the connection
speed may be slow, or Wi-Fi may not be available.
･
When the terminal is connected to Wi-Fi network
successfully, "Connected" appears. When a different
message appears, make sure the password (security
key).
When "Connected" does not appear even if you enter
a correct password (security key), the correct IP
address may not have been acquired. Check the
signal status and reconnect. It may take 5 minutes or
more to display the message after [Connect] is
tapped.
･
To use docomo service via Wi-Fi, setting "docomo ID"
is required. From the Home screen,
u
[Settings]
u
[docomo service/cloud]
u
[docomo ID
設定
(docomo
ID setting)] to set.
Deleting connecting Wi-Fi network
setting
1
From the Home screen,
u
[Settings]
u
[Wi-Fi].
2
Tap the Wi-Fi network that is
currently connected.
3
[Forget].
Summary of Contents for xperia z3 compact SO-02G
Page 1: ...14 10 INSTRUCTION MANUAL ...