Sony VAIO PCG-FXA63 User Manual Download Page 97

Page: 97 / 162

Notes on connecting an i.LINK device



Do not connect more than one digital video camera recorder at a time. The software supplied with your computer
will not recognize multiple cameras.



Do not connect an external device that requires power from the i.LINK port. The i.LINK port cannot supply power to
the external device.



The computer supports transfer rates up to 400 Mbps; however, the actual transfer rate is the lowest transfer rate
of the external device.



The i.LINK features available may vary depending on the software applications you use. See the documentation that
accompanied your software for more information.

Page 97

Summary of Contents for VAIO PCG-FXA63



































































































































































Search results

Summary of Contents for VAIO PCG-FXA63

Reviews:

Related manuals for VAIO PCG-FXA63

Brands by name

Popular brands

Sony VAIO PCG-FXA63, User Manual

Search results

Summary of Contents for VAIO PCG-FXA63

Reviews:

Related manuals for VAIO PCG-FXA63

Brands by name

Popular brands