Sony VAIO PCG-FXA63 User Manual Download Page 89

Page: 89 / 162

Inserting PC Cards

Your computer may contain PC Card slot protectors. Remove these protectors before you insert a PC Card into the slot.
See

To remove slot protectors

To insert a PC Card

Make sure the front label of the PC Card is facing up.

Push the PC Card gently into the slot. The PC Card is automatically detected by your system. The

Safely Remove

Hardware

icon

appears on the taskbar, indicating your system detected the PC Card.

Do not force a PC Card into the slot. It may damage the connector pins.

When a PC Card is inserted, do not place your computer in a bag or case. Pressure or shock to a PC Card may damage
your computer.

Touching the head of the PC Card will not damage to the connector pins, but damage may occur if the head of the PC
Card is sticking out of the PC Card slot while the computer is being transported.

Inserting a PC Card

Page 89

Summary of Contents for VAIO PCG-FXA63



































































































































































Search results

Summary of Contents for VAIO PCG-FXA63

Reviews:

Related manuals for VAIO PCG-FXA63

Brands by name

Popular brands

Sony VAIO PCG-FXA63, User Manual

Search results

Summary of Contents for VAIO PCG-FXA63

Reviews:

Related manuals for VAIO PCG-FXA63

Brands by name

Popular brands