Sony UWP-V1, Service Manual

Page: 60 / 164

2-40
UWP Series
2-4. URX-P2
2-4-1. Equipment and Tools
Equipment
Name Specifications Model Name
DC Power Supply Output regulated voltage: +3.00
±
0.1 V dc _
Signal generator Frequency : 100 kHz to 1040 MHz HP 8657A or equivalent
DC volt meter (Multi Meter) Effective digits : 3
1
/
2
digits HP 34401A or equivalent
Frequency counter Frequency : 1 Hz to 225 MHz HP 53181A or equivalent
Audio analyzer Frequency : 20 Hz to 100 kHz HP 8903B equivalent or equivalent
(with A-weighted filter)
Noise meter Frequency : 10 Hz to 500 kHz MEGURO MN-445B or equivalent
(with A-weighted filter)
Function generator 32.000 kHz signal 1 kHz signal (sine wave) HP 8904A or equivalent
can be generated. Adjustment can be 0.1 Hz
step the specification.
Mic amp Gain : 0 dB to 70 dB _
Input impedance : 600
Z
(balanced)
(with A-weighted filter)
Oscilloscope Frequency :DC to 30 MHz _
Tools Required
Name Part No. Remarks
MM-SMA conversion connector J-6402-490-A
RF adjusting cable J-6402-390-A
AF output cable 1-792-249-11
Adjustor (0.4 x 1.3 mm) 7-721-052-81 Screwdriver for adjustment (for RF circuit)
Antenna 1-754-575-11 or
1-501-612-13
.
Supplied accessory of UWP-V1, V2
. Wiring diagram
3-pole mini Phone plug (
Ø
3.5)
Chip
Ring
Sleeve
—Wiring side— —Wiring side—
XLR, 3P connector (male)
1 ; GND
2 ; HOT
3 ; COLD
2
1
3