37
GB
Common connection
When the positions of the red and
yellow leads are inverted
When the car without ACC position
After matching the connections and
switching power supply leads correctly,
connect the unit to the car’s power supply. If
you have any questions and problems
connecting your unit that are not covered in
this manual, consult the car dealer.
To capture your voice during handsfree
calling, you need to install the microphone
.
Cautions
• It is extremely dangerous if the cord
becomes wound around the steering
column or gearstick. Be sure to keep it and
other parts from interfering with your
driving operations.
• If airbags or any other shock-absorbing
equipment is in your car, contact the store
where you purchased this unit, or the car
dealer, before installation.
Note
Before attaching the double-sided tape
, clean
the surface of the dashboard with a dry cloth.
1
To enable the wired remote control,
set [STR CONTROL] in [SET STEERING]
to [PRESET] (page 19).
12
continuous power
supply
Yellow
15 switched power supply
Red
12 switched power supply
Yellow
15
continuous power
supply
Red
Red
Red
Yellow
Yellow
Red
Red
Yellow
Yellow
Red
Red
Yellow
Yellow
Installing the microphone (MEX-
N5200BT only)
Using the wired remote control
Clip (not supplied)
