36
GB
If you have a power antenna (aerial) without
a relay box, connecting this unit with the
supplied power supply lead
may damage
the antenna (aerial).
To the car’s speaker connector
To the car’s power connector
* MEX-N5200BT only
Subwoofer Easy Connection
You can use a subwoofer without a power
amplifier when it is connected to a rear
speaker cord.
Notes
• Preparation of the rear speaker cords is required.
• Use a subwoofer with an impedance of 4 Ω to 8 Ω,
and with adequate power handling capacities to
avoid damage.
Memory hold connection
When the yellow power supply lead is
connected, power will always be supplied to
the memory circuit even when the ignition
switch is turned off.
Speaker connection
• Before connecting the speakers, turn the
unit off.
• Use speakers with an impedance of 4 Ω to
8 Ω, and with adequate power handling
capacities to avoid damage.
Check your car’s auxiliary power connector,
and match the connections of cords
correctly depending on the car.
Making connections
1
Rear speaker
(right)
Purple
2
Purple/black
striped
3
Front speaker
(right)
Gray
4
Gray/black
striped
5
Front speaker
(left)
White
6
White/black
striped
7
Rear speaker
(left)
Green
8
Green/black
striped
12
continuous power
supply
Yellow
13
power antenna (aerial)
/power amplifier
control (REM OUT)
Blue/white
striped
14*
switched illumination
power supply
Orange/
white striped
15
switched power
supply
Red
16 ground (earth)
Black
Power connection diagram
Front speaker
Subwoofer
Auxiliary power connector
