Sony MDDISCAM DCM-M1, Service Manual

Page: 162 / 198

– 22 –
6) Check that the name associated with the pressed key is dis-
played at part
C
if a key on the set is pressed. (See Table
below)
Display Key name
PLAY
u
(PLAY/PAUSE)
STOP x (STOP)
FF
>
(FF)
REW . (REW)
SLOW y (SLOW)
A REC AUDIO REC
V REC (VIDEO REC)
PON ENTER
ERASE ERASE
MENU MENU
BRIGHT EXPOSURE
DISPLAY DSPL
e (VOL +)
VOLUME –
E
(VOL –)
PHOTO PHOTO
MARK BACK LIGHT
FORCUS FORCUS
7) Check that the “KEY CHECK MODE” characters on the screen
change to green in color if all keys on the set are pressed.
3. Adjustment Condition Check
In the Adjustment Condition Check mode, current conditions of
servo auto adjustment, MAC address setting, and touch panel po-
sition alignment can
be checked.
1) Select the item number “7-02-05”.
2) Press
u
key to activate the Adjustment Condition Check
mode.
(When the Adjustment Condition Check mode becomes ac-
tive, the screen changes as shown in Fig.7-1-31, and current
adjustment conditions are displayed)
Fig.7-1-31
• escription of display
OK ........... Adjustment successfully completed
NG ........... Adjustment failed (or not adjusted yet)
– ............... Not adjusted yet (Servo auto adjustment only)
• Key operation
x key ....... Releases the Adjustment Condition Check mode
y
key ..... Initializes the Adjustment Condition Check mode
If y key is pressed, the condition display of servo auto adjust-
ment will be all “–”, and that of MAC address setting and touch
panel position alignment will be “NG”. (Fig.7-1-31)
Note:
The adjustment data are not initialized even if the Adjust-
ment Condition Check mode is initialized.
4. Set Value Initializing
Each set value on the set can be initialized to the factory setting.
Initializing method
1) Select the item number “7-02-06”.
2) Press
y
key, and “OK” will be displayed on the screen and
each set value will be initialized to the factory setting.
Adjust Condition
OK
NG
MD1 -- OK
MO CD
Correct a location of Touch Panel
Write MAC address
MD2 OK NG
Condition display of servo auto adjustment
Condition display of MAC address setting
Condition display of
touch panel position alignment