Sony MAV-777, Operation Manual

Page: 58 / 148

3-34 (E)
Chapter 3 Operating Modes
3-6 CP Setup Mode
3-6 CP Setup Mode
3-6-1 Overview of the CP Setup Mode
The CP Setup mode allows you to make settings that affect control panel
operations. The settings are divided into the following six categories:
“General”, for general control panel settings; “Material”, for settings related to
Material mode; “Edit”, for settings related to Edit mode; “Timer Rec/Play”, for
settings related to Timer Rec/Play mode; “Dual Play”, for settings related to
Dual Play mode; and “Port” to make individual port settings.
Summary of control panel setup items
The following table contains the items that can be set in the CP Setup mode.
Default settings are enclosed in boxes in “Settings”.
Category
General
Setup
Number
0001
0002
0004
0005
0006
Name
Record Allocate
Length
Record Loading
Option
Record Material
Unload
Playback Loading
Option
Load Without
Unloading
Settings
Time data
00:30:00:00
None
Auto Extend
Loop
Individual
Unload
Unload/Stop
SHIFT+STOP>Unload
None
Loop
Individual
Disable
On Stop
Anytime
Description
Specifies the amount of time allocated for recording. Times of less
than one minute cannot be specified. Further, the amount of
space allocated may exceed that specified by a few frames.
When you want to specify a recorder port (R1 to R3), General
Setup item 0002: Record Loading Option must be set to
“Individual”.
Sets the options for loading material to the recording port.
None: Recording stops if the recording time set in the General
Setup Record Allocate Length is exceeded.
Auto Extend: Recording time is automatically extended within the
possible range.
Loop: Material is loop recorded for the amount of recording time
set in the General Setup Record Allocate Length.
Individual: Makes optional settings of recorder ports (R1 to R3). If
Edit Setup item 2005: 1st Edit Option is set to “Blank”, a blank
material of the length set in the General Setup item 0001: Record
Allocate Length is loaded.
Sets the method used to unload the material assigned to a
recording port.
Unload: Pressing Unload key performs normal unloading.
Unload/STOP: To unload, press the Unload key or the STOP
button.
SHIFT+STOP>Unload: Holding down the SHIFT key and pressing
STOP stops operation and unloading becomes possible (unload
status).
Specifies whether loop playback is conducted.
When you want to specify a player port (P1 to P3), set to
“Individual”.
Sets whether material currently assigned is automatically
unloaded when other material is loaded to the port.
Disable: Automatic unloading is disabled.
On Stop: Automatic unloading takes place only when playback is
stopped.
Anytime: Automatic unloading is possible at any time.