Sony LMT-300, Service Manual

Page: 62 / 92

3-16 (E)
LMT-300
3-4-5. SSD
m
.
Included board in the SSD assembly differs depending on the manufactured time.
When replacing the SSD assembly, make sure the parts with the combination of the following table.
PU-131 board assembly SSD assembly
PU-131 board assembly (A-1729-384-A) SSD assembly (A-1729-245-A)/SSD assembly (1180) (A-1891-869-A)
PU-131 board assembly (A-1729-384-B) SSD assembly (1180) (A-1891-869-A)
.
When the SSD assembly is replaced, the following information is initialized. Perform the setting again.
(Refer to the SMS manual for more details.)
.
Auditorium name
.
Network setting
.
Closed Caption setting
.
Settings covered with the import/export function of SMSC
.
SPL
.
Screening schedule
.
The SSD assembly can be replaced in the state that it is installed in SRX-R320.
Replacement part
Part name: SSD assembly (1180)
Part number:
!
A-1891-869-A
Replacement procedure
n
When replacing the SSD, be sure to wear a grounded earth-band to protect against static electricity.
1. Carefully remove the front panel. (Refer to Section 3-2-1.)
2. Open the DP board assembly. (Refer to Section 3-5-2.)
3. While pulling the handle of the SSD to be replaced
forward, gently push the levers in the direction of the
arrow A until they stop, and then carefully remove the
SSD.
Levers
SSD (unit)
DP board assembly
Handle
A
A