Sony LMT-300, Service Manual

Page: 40 / 92

2-12 (E)
LMT-300
2-3. Saving of Memory Contents during Replacement of PU-131 Board
Assembly
When replacing the PU-131 board assembly, back up the information contained in the old board and
restore it after replacement. How to backup and restore the contents of memory is described below.
2-3-1. Backup
Required equipment
.
Personal computer (PC)
.
Ethernet cable
(A crossing cable or straight cable can be used.)
.
getsetup.elp (Backup script fi le)
.
getsetup.bat (Backup batch fi le)
Connection
1. Save the following two network settings using PJT.
.
CTRL IN terminal: Menu-Maintenance-Network Setup
.
DATA IN terminal: Menu-Content-S2S Network Setup
n
When the value is 0.0.0.0, the default value 192.168.1.10 is set.
2. Connect the DATA IN terminal of this unit and a personal computer (PC) using an Ethernet cable.
Procedure
1. Acquire a backup package from the DigitalCinema home page.
2. Copy the two
fi les in “Required equipment” to any folder in PC.
3. Connect this unit to a network using an IE browser.
http://192.168.1.10/user/upload_home.cgi
n
For connection, the address of DATA IN terminal is used. Hereafter describes as to 192.168.1.10
(default).
4. Install a getsetup.elp fi le in this unit using an IE browser.
As a result, an intermediate fi le for backup is automatically generated inside this unit. Refer to Sec-
tion 2-2 for details of installation.
n
Do not execute the restart procedure (the same operation as in step 7 of Section 2-2). This results in
the erasure of the intermediate
fi le generated inside this unit.
5. In the MS-DOS command line of PC, move to the directory, in which the two fi les copied in proce-
dure 2 are stored, using a cd command.
c:\>cd temp
c:\temp>