Sony LMT-300, Service Manual

Page: 11 / 92

1-3 (E)
LMT-300
10. Loosen the two screws (with stopper), then remove the front panel.
n
When attaching the front panel, tighten the screws (with stopper) using the screwdriver.
Tightening torque: 0.8 N
.
m (8.16 kgf
.
cm)
11. Disconnect the harness from the STATUS LIGHT connector in the front panel.
12. Disconnect the all cables connecting to this unit.
13. Remove the HDD unit. (Refer to the LMT-300 installation manual.)
14. Remove the four screws (B5
x
12).
15. Pull out this unit from SRX-R320.
16. To install, reverse the removal procedure.
Harness
STATUS LIGHT
connector
LMT-300
B5
x
12
B5
x
12
SRX-R320
Front panel
PSW4
x
35
(with stopper)
PSW4
x
35
(with stopper)