PCS-G50/G50P
2-5
CPU-382 board
Bracket
DSP-113
board
CN2501
CN1205
CN101
CN1501
Connector
screws
MIC jack shield
plate
PSW3
x
6
PSW3
x
6
BVTP3
x
8
2-2-3. DSP-113 Board
Removal
1.
Remove the top cover assembly.
(Refer to steps 1 to 3 in Section 1-4-1.)
2.
Disconnect the harness and the flexible flat
cable from the connectors (CN1205 and
CN1501) on the DSP-113 board.
3.
Remove the screw, and remove the bracket.
4.
Remove the four screws and the four connec-
tor screws.
5.
Remove the DSP-113 board from the connec-
tor CN2501 on the CPU-382 board in the
direction of the arrow.
6.
Remove the MIC jack shield plate on the
DSP-113 board.
Installation
7.
Reinstall the DSP-113 board in the reverse
order of steps 2 to 6.
n
Be sure to connect the connector CN101 on
the DSP-113 board to the connector CN2501
on the CPU-382 board.
8.
Reattach the top cover assembly.
(Refer to Section 1-4-1.)
Summary of Contents for Ipels PCS-G50
