130
Starting an Encrypted Connection
Starting an Encrypted Connection
You can start an encrypted connection by calling a remote party in the same
manner as a basic connection.
During an encrypted connection, the encryption icon
is displayed on the
screen.
When the encryption icon is not displayed on the screen, transmission and reception
data will not be encrypted. Be sure to confirm if the icon is displayed before starting an
encrypted connection.
When the encrypted connection is disabled
If the following message appears when you call a remote party, an encrypted
connection is not available.
Note
Error Messages
Causes
The encryption feature on a far-
end system is disabled.
The encryption feature on a remote system is
turned off.
Could not start connection
because the encryption feature of
the local system was disabled.
The encryption feature on the local system is
disabled.
Could not start connection
because the encryption feature of
the remote system was disabled.
The encryption feature on the remote system is
disabled.
H
H
