38
Registering Local Information
The Communication Mode menu is used to
set up communications.
Page 1/2
Setting items on page 2 and after of the
Communication Mode menu vary according to
the settings configured by “Peer-to-
Peer/Multipoint” and
“Transmission/Reception Bit Rate”.
Peer-to-Peer/Multipoint
Allows you to select whether to perform the
communication mode settings for peer-to-
peer connection and multipoint connection
individually.
Common Settings:
Performs the settings
commonly.
Individual Settings:
Performs the settings
for peer-to-peer connection and for
multipoint connection individually.
Transmission/Reception Bit Rate
Allows you to select whether to perform Bit
Rate settings for transmission and reception
individually.
Common Settings:
Performs all settings
commonly.
Individual Settings:
Performs transmission
and reception settings individually.
Multipoint Connection
Allows you to select whether to enable
multipoint connection. If it is disabled, only
peer-to-peer connection is allowed.
Enable:
Enables multipoint connection
Disable:
Disables multipoint connection.
Page 2/2
The following example shows the display
when “Peer-to-Peer/Multipoint” and
“Transmission/Reception Bit Rate” are set to
“Common Settings” on page 1/2. When they
are set to “Individual Settings”, individual
setting items are displayed.
Communication Bit Rate
Allows you to select Communication Bit
Rate for a point.
When “Peer-to-Peer/Multipoint” and
“Transmission/Reception Bit Rate” on page
1/2 are set to “Individual Settings”, you can
configure Peer-to-Peer/Multipoint and
Transmission/Reception individually.
You can select from among 2Mbps,
2.5Mbps, 3Mbps, 4Mbps, 5Mbps, 6Mbps,
7Mbps, 8Mbps and “Other”.
When “Other” is selected, you can enter a
bandwidth value up to 8000Kbps.
Total Bandwidth
Allows you to select the total bandwidth to
be used for system.
In multipoint connection, the total
bandwidth of all points is displayed.
4 Mbps, 5 Mbps, 6 Mbps, 7 Mbps, 8 Mbps
and Other can be selected.
When “Other” is selected, you can enter up
to 1,2000Kbps.
In multipoint connection, the actual
Communication Bit Rate for each point is
automatically adjusted so as not to exceed
“Total Bandwidth”.
Video Mode
Shows the compression format of the video
transmitted or received. It is fixed to the
format compliant with the H.264 standards.
Communication Mode Menu
Note
Communication Mode
Cancel
Save
2005.12.28 12:34
Common Settings
1/2
Peer-to-Peer/Multipoint
Page:
Common Settings
Transmission/Reception Bit Rate
Enable
Multipoint Connection
Note
Note
Communication Mode
Cancel
Save
2005.12.28 12:34
2 Mbps
Auto
Auto
Off
2/2
Communication Bit Rate
Page:
4 Mbps
H.264
Total Bandwidth
Video Mode
Video Frame
Audio Mode
Far End Camera Control