118
Using Multiple Microphones
To use the connected microphone
Select “A1/A3” under “AUDIO IN” on Page 1/3 in the Audio Setup menu.
To use two microphones as stereo microphones, set “Input Mode” to “Stereo”
on Page 1/3 in the Audio Setup menu. To use them as monaural microphones,
set “Input Mode” to “Monaural”.
Notes on installation of the microphones
• Install microphones about 50 cm (1.6 ft) away from the participants.
• Avoid persons crosing between the microphone and the speaker.
• Place the microphone in a quiet, echo-free location.
• Install microphones away from equipment that may cause noise.
• Avoid covering the microphone, with paper for example, or carrying the
microphone and moving it. If you do either, extreme noise and echo may be
heard temporarily by the remote party. In this case, wait until the echo
disappears.
• For stereo sound, install the microphone connected to the MIC PLUG IN
POWER 1(R) jack to the right viewed from the camera, and the microphone
connected to the 2(L) jack to the left.
L
R
Audio Setup
2005.12.28 12:34
Cancel
Save
1/4
Page:
Input Select
AUDIO IN
MIC+AUX
Input Mode
Stereo
Output Mode
Monaural
AUX2
AUX1
A1/A3
EC-MIC(A7)
MIC
HD-SDI
