manualshive.com logo in svg

Sony IPELA PCS-HG90, Operating Instructions Manual

The Sony IPELA PCS-HG90 is a high-performance video conference system designed for professional communication. Its impressive specifications and advanced features make it a versatile solution for businesses. To get the most out of your PCS-HG90, download the free user manual from manualshive.com to explore its capabilities and maximize productivity.

Share
Download
background image

174

On-screen Messages

LAN configuration error. Gatekeeper Mode 
is set to On. Enter the gatekeeper address.

LAN connection is set to use the gatekeeper. Enter 
the gatekeeper address.

LAN configuration error. NAT Mode is set 
to On. Check the NAT address.

LAN connection is set to use NAT. Check the NAT 
address in the LAN Setup menu.

LAN configuration error. Unauthorized NAT 
address is specified. Check the NAT address.

The set NAT address cannot be used. Enter the 
correct NAT address in the LAN Setup menu.

LAN configuration error. Different address 
from NAT machines is specified. Check the 
NAT address.

Enter the correct NAT address in the LAN Setup 
menu.

LAN configuration error. Connection is not 
complete as the port number overlaps.

Check the TCP and UDP port numbers in the LAN 
Setup menu.

LAN configuration error. Connection is not 
complete as an invalid port number is 
specified.

Check the TCP and UDP port numbers in the LAN 
Setup menu.

Line is busy. Try to dial again later.

Connection has filed as the line is busy. Try to dial 
again later.

Dialing the same address is invalid.

You are calling the same party.

Check the line interface or the IP address is 
set correctly.

Select the correct dial mode or enter the correct IP 
address in the Detailed Dial menu.

Dial setup error. No prefix number is 
entered.

The LAN prefix is not registered in the Dial Setup 
menu.

LAN configuration error. PPPoE is set to 
On. Check the PPPoE User Name and 
Password.

PPPoE is set for LAN connection. Configuration of 
the user name and password is required.

LAN configuration error.  Fixed IP for 
PPPoE is set to On. Check the Fixed IP for 
PPPoE is entered correctly.

Enter a correct IP address in “Fixed IP Address for 
PPPoE” in the LAN Setup menu.

LAN configuration error. IP Precedence 
exceeds the maximum value.

Set the IP Precedence value between 0 and 7 in the 
LAN Setup menu.

LAN configuration error. Diffserve exceeds 
the maximum value.

Set the Diffserve value between 0 and 64 in the 
LAN Setup menu.

Warning!! The fan of the main camera has 
stopped.

The main camera has a problem and operating the 
camera in this condition may damage it. Turn off 
the power of the main camera and consult your 
Sony dealer.

Warning!! The fan of the sub camera has 
stopped.

The sub camera has a problem and operating the 
camera in this condition may damage it. Turn off 
the power of the sub camera and consult your Sony 
dealer.

The encryption feature on a far-end system 
is disabled.

Have the far-end side enable their encryption 
feature.

Could not start connection because the 
encryption feature of the local system was 
disabled.

Enable the encryption feature.

Message

Meaning

Summary of Contents for IPELA PCS-HG90









































































































































































































Reviews:

No comments

Related manuals for IPELA PCS-HG90

S&S Northern Merlin 1000VW+ Installation, Operating And Maintenance preview
Merlin 1000VW+
Brand: S&S Northern Pages: 9
Balboa Revolution System Overview Manual preview
Revolution
Brand: Balboa Pages: 74
Fender Passport Conference 2 Series Owner'S Manual preview
Passport Conference 2 Series
Brand: Fender Pages: 20
Lucent Technologies PARTNER II Release 4.1 Programming And Use Instructions preview
PARTNER II Release 4.1
Brand: Lucent Technologies Pages: 363
Hall Technologies HT-CALIPSO Manual preview
HT-CALIPSO
Brand: Hall Technologies Pages: 10
Fagor CP-G905 Installation, Usage And Maintenance Instructions preview
CP-G905
Brand: Fagor Pages: 68
RADVision SCOPIA Elite 5200 Maintenance Manual preview
SCOPIA Elite 5200
Brand: RADVision Pages: 17
American Panel IC+ Manual preview
IC+
Brand: American Panel Pages: 18
TerraTec Aureon 7.1 FireWire Product Information preview
Aureon 7.1 FireWire
Brand: TerraTec Pages: 2
Sennheiser SDC 8000 DC Product Sheet preview
SDC 8000 DC
Brand: Sennheiser Pages: 1
Shure IS 6132 User Manual preview
IS 6132
Brand: Shure Pages: 18
Twin-Star International Bell'O Digital BDSW-1650-BLK Manual preview
Bell'O Digital BDSW-1650-BLK
Brand: Twin-Star International Pages: 20
Alcatel-Lucent Konftel EGO 8105s OmniSound User Manual preview
Konftel EGO 8105s OmniSound
Brand: Alcatel-Lucent Pages: 20
TDK MAF Series Manual preview
MAF Series
Brand: TDK Pages: 9
Vahle DCS1-HW Instructions Manual preview
DCS1-HW
Brand: Vahle Pages: 100
Sonoro MEISTERSTUCK SO-610 Operating Manual preview
MEISTERSTUCK SO-610
Brand: Sonoro Pages: 334
Roger Technology B72/DGS Instruction And Warnings For The Installer preview
B72/DGS
Brand: Roger Technology Pages: 8
ETT MEGAKICK Daytona 800 Reference Manual preview
MEGAKICK Daytona 800
Brand: ETT Pages: 6

Brands by name

Popular brands

Load more brands