73
Measuring the Network Quality
C
h
a
p
te
r 2:
R
e
gi
s
tr
a
tio
n
an
d Se
tu
p
fo
r Sy
s
tem
A
d
m
in
is
tr
a
to
rs
The measured results are also shown on the “Result of Network Quality
Measurement (Simplex) (Page 3/4)” or “Result of Network Quality
Measurement (Duplex) (Page 4/4)”.
For details on the result screens, see “Result of Network Quality
Measurement” in the Administrator Setup menu (page 53).
If you cannot judge the measured results, consult your network administrator
or Sony dealer.
• You cannot use the other functions of the unit including a communication during the
network quality measurement.
• You can perform the load and stress test only when the remote terminal is PCS-HG90
with version 2.2 or later.
To refuse the network quality measurement activated from a
remote party
Select “Disabled” under “Measurement from Remote Site” on the “Other
Settings (Page 2/2)” screen of the Administrator menu, then you can refuse the
measurement activated from a remote party without prior notice.
Notes
Administrator Setup
2005.12.28 12:34
End
2/4
Page:
Gateway
Result
ping
Result
Packet Loss (%)
RTT
H.323
Traceroute
Hop
Total RTT
Result of Network Quality Measurement
