Sony HSR-1, Service Manual

Page: 94 / 188

3-24 HSR-1/1P
HSR-2/2P
A
A
Unlocked status
Connector
Insulation side
Flexible card wire
A
A
Locked status
Connector
Flexible card wire
3-12. NOTES ON REPAIR PARTS
3-12-1. Flexible Card Wire Replacement
The following six types of flexible card wire are used in
the HSR-1/1P/2/2P.
Type Destination: Board Name Type Number
(Connector Name) of pins
A MB-801 (CN107)
_
JC-19 (CN103) B 30
C MB-801 (CN106) _ JC-19 (CN702) G 40
D RP-228 (CN101) _ JC-19 (CN412) D 30
D RP-228 (CN102) _ JC-19 (CN411) D 30
D CM-56 (CN003) _ RP-228 (CN103) D 30
E CM-56 (CN006) _ Reel Motor _ 15
E CM-56 (CN007) _ Capstan Motor _ 15
F CM-56 (CN005)
_
MD-64 (CN002) F 9
F CM-56 (CN008) _ MD-65 (CN202) F 14
F CM-56 (CN001) _ MD-63 (CN101) F 16
A KY-425 (CN103)
_
Front Panel D 22
(16-key unit)
Note : Take utmost care when handling the flexible
card wires because their life is extremely
shortened by folding.
< Type A >
Removing method
Note : ..... Do not pull the flexible card wire before
releasing the lock.
.....
The flexible card wire has the conduction
side and the insulation side. Check the
conduction side and the insulation side
before disconnection.
1. Move the portion “ A ” of the connector in the direction
of the arrow A to release the lock. Remove the flexible
card wire.
Insertion method
Note :
.....
Confirm that the contacting surface of the
flexible card wire is free from stain and dust.
..... Confirm that the lock of the connector is
already released.
1. Insert the flexible card wire securely to the deep end.
2. Push in the portion marked “ A ” of the connector in the
direction of the arrow to lock the connector. Be careful
that the flexible card wire is not slanted with respect to
the connector.