1-12
HSR-1/1P
HSR-2/2P
Chapter 2
Basic Operations
2-4
Chapter 2
Basic Operations
Switching the Pictures
The number keys of the cameras whose pictures can be monitored flash in
green.
To select the picture(s) for monitoring, use the flashing camera number
keys or the CURSOR
V
/
v
/
B
/
b
keys.
For connections and Image Control menu operation, see Chapter 5 “Connections
and Preparations.”
To select a specific camera
Press the number key corresponding to the camera to be monitored.
The key then flashes in amber, and the picture of the selected camera is
displayed on the full screen.
Press the same key again to return to the pervious condition.
To select a divided screen
Multiple camera pictures can be monitored by selecting the screen division
mode.
To change the structure
Press the
V
or
v
key.
Each time you press either of the keys, the display switches to the next of
night patterns, from the full screen to 16-division mode.
To change the pages
Press the
B
or
b
key.
The pages are cyclically switched.
To automatically switch pages
The pages of the structure selected using the
V
or
v
key are automatically
switched at the cycle specified in the range of 1 to 60 seconds.
Set MONITOR to AUTO on the Image Control menu.
For the settings, see Chapter 5 “Connections and Preparations.”
Monitoring Picture
CURSOR
V
/
v
/
B
/
b
keys
Camera number keys
S
DIGITAL SURVELLANCE RECORDER HSR-1
DIGITAL
TIMELAPSE
CONTROL-S
REC
EJECT
FRAME
STOP
FRAME
REC
F FWD
PLAY
REW
‚
§
·
º
¶
π
®
æ
LOCK
TIME
SEARCH
ALARM
SEARCH
CURSOR
MENU
SET/YES
RESET/NO
†
10
11
12
13
14
15
16
◊
√
ı
∫
1
2
3
4
5
6
7
8
9
Chapter 2
Basic Operations
Chapter 2
Basic Operations
2-5
Recording
Normal Recording
About the recording modes
Up to five user-preset recording modes can be registered to this recorder.
You may specify a set of recording requirements to each recording mode.
Once the recording modes are set, the specified requirements for recording
are set merely by selecting one of your preset recording modes.
Example of setting a user-preset recording mode:
CAMERA NUMBER :
8
TAPE LENGTH:
270MIN
IMAGE QUALITY:
SUPER
TIME MODE:
33H
REC CYCLE:
1.00SEC
When recording is executed with the example recording mode selected,
pictures from all eight cameras that have been specified to be used for
recording (set to REC) are cyclically recorded once per 1.00 second in
SUPER image quality mode (HSR-1/2: horizontal 720
×
vertical 240,
HSR-1P/2P: horizontal 720
×
vertical 288 pixels) for 33 hours on a single
cassette of 270-minute tape length.
Recording modes can be registered by using “Setting of Rec Mode” of the
Recording Function menu.
For registrating the recording modes, see Chapter 5.
To select a recording mode
A recording mode for normal recording can be selected on the monitor
screen or on the character display on the front panel.
Once you select a mode, it is not necessary to select the mode again unless
it needs to be changed.
See Chapter 4 “Menu Operations” for additional information on the operation.
1
Enter Menu mode by pressing the MENU key.
2
Highlight REC FUNCTION MENU (or display “RecFuncMenu” on
the front panel) of the Top menu (page 4-5) by pressing the
V
or
v
key,
then press the
b
key.
The Recording Function menu is displayed.
SETUP MENU
REC FUNCTION MENU
NORMAL REC
: MODE 1
TIMER REC
ALARM REC
REPEAT REC
: OFF
CONTINUOUS REC
1)
: OFF
SETTING OF REC MODE
1) HSR-1/1P only
Summary of Contents for HSR-1
