1-17
HSR-1/1P
HSR-2/2P
Chapter 2
Basic Operations
2-14
Chapter 2
Basic Operations
After checking the recorded picture with a Playback During Recording
operation, be sure to cancel Playback During Recording mode. If you
leave Playback During Recording mode activate for a long time after this
operation, the recording capacity of the hard disk drive may be exhausted,
and the recorded data on the hard disk may be erased before it is copied to
a tape.
To start playback from a desired tape position
Press the F FWD or REW key and find the position where you want to
start playback.
Playback starts once you press the PLAY key. (In this case, playback
starts from the position where you press the PLAY key, regardless of your
preset pre-reverse time.)
To search for a picture
Press the ALARM SEARCH or TIME SEARCH key. Recording
continues, and you can execute Alarm Search or Time Search.
For details on the search operations, see “Alarm Search” (page 3-9) or “Time
Search” (page 2-10).
You can also perform a search operation using the F FWD and REW keys
or frame-to-frame using the FRAME keys in the same way as in the
ordinary playback mode. A search operation can also be performed using
the Jog/Shuttle dial of the SVRM-100A.
To play back another cassette
1
With recording continued, press the EJECT key.
Playback During Recording mode is activated, and the cassette is
ejected. Recording continues using the hard disk.
2
Insert a cassette to be played and press the PLAY key.
Playback of the inserted cassette begins.
To cancel the Playback During Recording mode
After checking the recorded pictures with a Playback During Recording
operation, cancel Playback During Recording mode and copy the data on
the hard disk to the tape.
1
Press the STOP key.
Guidance for the next operation is displayed.
Playback During Recording (HSR-2/2P only)
Chapter 2
Basic Operations
Chapter 2
Basic Operations
2-15
2
Press the REC key.
Playback During Recording mode is canceled, and the unit is set to the
ordinary recording mode.
The data recorded on the hard disk during Playback During Recording
operation are copied to the tape.
About the continuity of recording on a tape
The present tape position may be different from the tape position when
you started a Playback During Recording operation because of changing
cassettes or tape running in Playback During Recording mode. In such a
case, a message to show that the tape position has been moved is displayed
when you press the REC key in step
2
of “To cancel Playback During
Recording mode.”
To continue recording from the present tape position
Press the YES key.
Playback During Recording mode is canceled, and recording continues
from the present tape position.
To continue recording from the original tape position when you
have started a Playback During Recording operation
1
Press the NO key.
The display returns to the guidance in step
1
of “To cancel Playback
During Recording mode.”
2
Find the original tape position by using the Rec End Search function.
If the cassette has been changed, first insert the original cassette and
locate the original position.
3
Press the REC key again.
Playback During Recording mode is canceled, and copying of the data
from the hard disk to the tape begins, maintaining continuity on the
tape.
To stop recording
Press the STOP key.
A message to confirm that you want recording to stop is displayed.
Press the YES key.
A cassette cannot be ejected if copying from the hard disk to the tape has
not completed. It may take more than 90 seconds until the cassette can be
ejected after you press the YES key.
Summary of Contents for HSR-1
