Sony HDC-750A, Operation Manual

Page: 67 / 114

Chapter 2 Location and Function of Parts
Chapter 2 Location and Function of Parts
2-1(E)
2-1 Accessory Attachments
Chapter 2 Location and Function of P
a
rt
s
Grip
1
1 /
4
” screw
2
Shoulder strap fitting post
3
Viewfinder front-rear positioning lever
4
Viewfinder left-right positioning lever
5
Lens cable clamp
6
Lens fixing lever
7
Lens mount cap
8
Lens mount
9
Tripod mount
0
LENS connector
1
1
/
4
” screw (for attaching light)
Used for attaching a video light, etc. Below the label.
2
Shoulder strap fitting post
When the camera is connected to a camera adaptor and
used with the supplied shoulder strap, attach one end
of the shoulder strap to this fitting post, and the other
end to the fitting post on the camera adaptor.
3
Viewfinder front-rear positioning lever
Loosen this lever to adjust the viewfinder position
towards the front or rear.
4
Viewfinder left-right positioning lever
Loosen this lever to adjust the viewfinder position
towards the left or right.
5
Lens cable clamp
Used to secure the lens cable.
6
Lens fixing lever
Used to secure the lens (not supplied) in the lens
mount
8
.
7
Lens mount cap
Cover the lens mount with this cap when a lens is not
attached. The cover may be removed by moving the
lens fixing lever
6
upwards.
8
Lens mount
Used to attach a lens (not supplied).
9
Tripod mount
Attach the VCT-14 Tripod Adaptor when mounting
the HDC-750A on a tripod.
0
LENS connector (12-pin)
Connect the lens cable. The camera can control the
lens functions through this cable.