Sony HDC-750A, Operation Manual

Page: 98 / 114

Chapter 4 Adjustments and Settings for Recording
4-14(E)
Chapter 4 Adjustments and Settings for Recording
4-5 Setup Using the OPERATION Menu
4
Rotate the MENU SEL control to change the
setting to the desired value, and push the MENU
SEL control/button.
The “?” mark will change back to the “ n ” marker
and the new setting will be saved.
The gain values for L, M, and H may be set to any
of the following values: –3, 0, 3, 6, or 12 dB.
To set the gain value for another switch position,
return to step
3
.
5
To end menu operations, set the VF DISP switch
to ON.
The menu display will disappear from the
viewfinder screen, and the current status of the
camera will be displayed on the upper and lower
edges of the screen.
4-5-4 Setting up the Viewfinder
The VF SETUP page of the OPERATION menu is
used to set up items related to the viewfinder.
1
Set the VF DISP switch to MENU.
The OPERATION menu will be displayed on the
viewfinder screen.
2
Rotate the MENU SEL control to display the VF
SETUP page, and push the MENU SEL control.
VF DETAIL: Used to set VF detail to ON or OFF
ZEBRA: (70%)(100%): Toggles zebra markers on
and off and selects the marker type (70%,
100% or both).
VF SCAN: Used to set the viewfinder scan mode
(16:9, 4:3, or Squeeze).
3
Rotate the MENU SEL control to align the “
n
”
marker with the item to be changed, and push the
MENU SEL control.
The “
n
” marker will change into a “?” mark.
4
Rotate the MENU SEL control to change the
setting to the desired value, and push the MENU
SEL control.
The “?” mark will change back to the “ n ” marker
and the new setting will be saved.
5
To set the values for another items, repeat steps 3
and
4
.
6
To end menu operations, set the VF DISP switch to
ON.
The menu display will disappear from the
viewfinder screen, and the status of items set to
ON will be displayed on the screen.
4-5-5 Setting Microphone Gain
and Intercom Line
The AUDIO page of the OPERATION menu is used to
set the gain for microphones 1 and 2, and to select the
intercom line.
1
Set the VF DISP switch to MENU.
The OPERATION menu will be displayed on the
viewfinder screen.
VF DISP switch
MENU SEL control
VF DISP switch
MENU SEL control