Sony HDC-750A, Operation Manual

Page: 71 / 114

Chapter 2 Location and Function of Parts
Chapter 2 Location and Function of Parts
2-5(E)
Front
1
VF connector
1
VF (viewfinder) connector (20-pin)
Connects to the viewfinder cable.
2
SHUTTER switch
Set to ON when using the electronic shutter. The
shutter speed and shutter mode may be changed.
3
EARPHONE LEVEL control
Adjusts the earphone volume level.
4
VTR START (recording start/stop) button
When a VTR is connected, recording begins when this
button is pressed, and stops when it is pressed again.
Works the same as the VTR button on the lens.
5
TEST OUT (test output) connector (BNC type)
Connect a monitor or VTR as necessary. The output
will be the signal selected with the Y/RGB and R/G/B/
switches.
6
MIC (microphone input) connector (XLR 3-pin,
female)
Used to connect a microphone. Works with phantom
power supply type microphones. +48 V will be
supplied constantly.
2
SHUTTER switch
3
EARPHONE LEVEL control
4
VTR START button
5
TEST OUT connector
6
MIC connector