Sony HDC-750A, Operation Manual

Page: 103 / 114

Chapter 4 Adjustments and Settings for Recording
Chapter 4 Adjustments and Settings for Recording
4-19(E)
Page Setting item Allowable settings Description
(Continued)
Detail1 Detail ON, OFF Turns ON or OFF the feature of adding a detail signal for
resolution enhancement
Level –99 to +99 Sets the overall level of the detail signal
Limiter –99 to +99 Sets the clipping level for an excessive value of the detail
signal
Crispening –99 to +99 Sets the crispening restricting the detail with respect to noise
H/V ratio –99 to +99 Sets the mixing ratio of the horizontal and vertical detail
signals
Frequency –99 to +99 Sets the frequency of the horizontal detail signal
Level DEP –99 to +99 Sets the level at which the amount of detail is suppressed
in areas of low level
Level DEP ON, OFF Sets the level dependancy feature to ON or OFF
Clear Push the MENU SEL
control to execute
Resets all Detail1 page settings to 0.
(When the MENU SEL control is pushed, the CLEAR display
will blink. Pushing the MENU SEL control again will execute
the clear; pressing the CANCEL button will cancel.)
Clear Push the MENU SEL
control to execute Resets all Gamma page settings to 0.
(When the MENU SEL control is pushed, the CLEAR display
will blink. Pushing the MENU SEL control again will execute
the clear; pressing the CANCEL button will cancel.)
Knee1 Point R,G,B,M –99 to +99 Sets the knee point level for when the auto knee feature is
turned OFF
Slope R,G,B,M –99 to +99 Sets the knee slope level for when the auto knee feature is
turned OFF
W.CLP R,G,B,M –99 to +99 Sets the white clip level
Knee ON, OFF Turns the knee correction circuit ON or OFF
Auto Knee ON, OFF Turns the auto knee feature ON or OFF
White Clip ON, OFF Turns the white clip feature ON or OFF
Test
1, 2, OFF
Selects test signal
1: Sawtooth wave test output
2: Three-step waveform test output
OFF: No test signal output
Clear Push the MENU
SEL control to
execute Resets all Knee1 page settings to 0.
(When the MENU SEL control is pushed, the CLEAR display
will blink. Pushing the MENU SEL control again will execute
the clear; pressing the CANCEL button will cancel.)
Knee Saturation
–99 to +99 Adjusts the knee saturation feature Knee SAT Level
ON, OFF Turns the knee saturation feature ON or OFF
Super Skin Knee ON, OFF Turns the super skin knee feature ON or OFF
Test 1, 2, OFF Selects test signal
1: Sawtooth wave test output
2: Three-step waveform test output
OFF: No test signal output
Knee2
Clear
Push the MENU SEL
control to execute
Resets all Knee2 page settings to 0.
(When the MENU SEL control is pushed, the CLEAR display
will blink. Pushing the MENU SEL control again will execute
the clear; pressing the CANCEL button will cancel.)