Sony h.ear go 2, Help Manual

Page: 89 / 230

Hint
The procedure explained above is for guidance only. For details, refer to the operating instructions supplied with the
BLUETOOTH device.
You can perform pairing or connect to another BLUETOOTH device even when a BLUETOOTH connection is established. In this
case, the previous connection will be disconnected.
Even if the speaker is not turned on, the BLUETOOTH indicator flashes when touching with a device. When the connection is
established, the speaker is turned on automatically. If the Wi-Fi network function and BLUETOOTH network function is off, it will
not connect by touching with a device. For details, see “
How to turn off the Wi-Fi network/BLUETOOTH function .”
If the connection is not established, do the following.
Move the device over the N-Mark of the speaker slowly.
If the device is in a case, remove it.
When you touch an NFC-compatible device which is connected with another NFC-compatible device such as a headphone, the
connection is switched to the speaker automatically.
Note
If the NFC fails to connect, touch with the device again.
Stop playback on the BLUETOOTH device and turn down the volume of the device beforehand. When pairing is completed, loud
sound may output from the speaker. Otherwise, you may experience sudden loud sound from the speaker when music is played
back for the first time after pairing.
Related Topic
Listening to music on a device via a BLUETOOTH connection
4-735-503-11(1) Copyright 2018 Sony Corporation
Follow the instructions on the screen.
When the BLUETOOTH connection is established, the BLUETOOTH indicator stops flashing and stays lit.
To disconnect, touch the speaker with the device again.
89