Sony h.ear go 2, Help Manual

Page: 123 / 230

To enjoy a more dynamic sound
Pull the lever on the bottom of the speaker in the direction of the arrow shown in the illustration below to remove the
grille.
*
Hint
After “Sony | Music Center” is downloaded and installed to your smartphone, iPhone, etc., you can use your smartphone, iPhone,
etc. as a remote control to operate devices connected to the speaker.
Note
The procedure explained above is for guidance only. Normally, the volume level on a PC and the speaker do not synchronize.
However, depending on the version of “Windows Media Player” installed on a PC or the PC's condition, the volume levels may
synchronize.
The speaker can play MP3, WMA, AAC and WAV format files (only AAC files with the extension “.m4a,” “.mp4,” or “.3gp” can be
played). Even if the bit rate and file format are supported, the playback of all files is not guaranteed. There may be a specification
change.
Files with DRM (Digital Rights Management) copyright protection cannot be played on the speaker. To check if a WMA file is
protected by DRM, right-click the file on the PC. If there is a [License] tab, the file is DRM-copyrighted.
The device list appears.
Tap [h.ear go 2].
6
Select a song to play and adjust the volume.
The selected song will be heard from the speaker.
7
After removing the speaker grille, do not touch the exposed part of the speaker (speaker units), and keep the removed grille on a flat surface to
prevent distortion.
*
123