Sony h.ear go 2, Help Manual

Page: 161 / 230

BLUETOOTH indicator
*1*2*3*4
NETWORK indicator
*1*2*4
UPDATE indicator
*5
EXTRA BASS indicator
(right) / (left) indicators
Lights up or flashes depending on the status of the speaker while the Wireless Surround function, the Wireless Stereo
function, or the Speaker Add function is on.
Related Topic
Parts and controls
Checking the Wi-Fi signal strength (reception sensitivity)
Updating the pre-installed software
The power indicator flashes in red
Using this speaker as a rear speaker (Wireless Surround)
Connecting two speakers (Wireless Stereo)
Connecting two speakers (Speaker Add function)
Lights up (white) The speaker is in the USB mode.
Lights up (white) The speaker is connected to a BLUETOOTH device.
Flashes quickly (three times a second) (white) The speaker is pairing with a BLUETOOTH device.
Flashes (once a second) (white) The speaker is searching for a BLUETOOTH device to connect.
Lights up (white) The speaker is in the NETWORK mode.
Lights up (green or light blue) The speaker is connected to a music service.
Lights
up
(orange) The speaker detected the availability of a software update while connected to the Internet. After pressing
and holding the UPDATE button for 2 seconds while the indicator is lit, the software update starts when the
speaker beeps.
Flashes
(orange)
The speaker is updating the software. During the update, you cannot operate the speaker.
When the speaker turns on for the first time after the software update, the UPDATE button flashes three
times to inform you that the update has completed.
Lights up You can enjoy the bass sound effect.
Turns off The bass sound effect is not activated. This is set as the default.
When checking the Wi-Fi signal strength (reception sensitivity), the indicator is lit while connected to the Wi-Fi network. *1
When switching the wireless function to on/off, the indicator flashes.
*2
When switching the BLUETOOTH audio streaming playback quality of the speaker, the indicator flashes.
*3
When disabling the Wi-Fi network function and BLUETOOTH network function, the indicator flashes. *4
If the software updating has failed, the indicator is lit. *5
161