![background image](http://html.mh-extra.com/html/sony/giga-juke-nas-50hde/giga-juke-nas-50hde_operating-instructions-manual_420549081.webp)
NAS-50HDE.GB.2-890-157-
11
(1)
1
GB
Continued
Connect the speakers to the unit.
Connect the cords to the SPEAKER
terminals on the unit.
After connecting the speaker cords and
while facing the front of the unit, place the
speaker connected to the “R” terminal to
the right and the speaker connected to the
“L” terminal to the left.
Right
left
Note
Make sure to keep the speaker cords away from
the antennas as they may produce noise in the
radio reception.
Connect the AM loop antenna.
Connect the AM loop antenna to the AM
antenna terminals on the unit.
Pull on the cord lightly afterwards
to confirm that the antenna is firmly
connected.
Notes
Make sure to keep the AM loop antenna away
from the unit or other AV equipment as this
may produce noise in the radio reception.
Make sure the metal leads (not the part
covered with vinyl insulation) are securely
inserted into the antenna terminals.
Connect the FM wire antenna.
Connect the FM wire antenna to the FM
antenna jack on the unit.
FM wire antenna
Notes
Make sure not to wind the FM wire antenna
up during use.
After connecting the FM wire antenna, lay
it out so that it is as parallel to the floor as
possible.
When FM reception is poor
Use a commercially available 75
coaxial cable
to connect the unit to an external antenna.
External antenna
Connect the DAB wire antenna (UK
model only).
With a DAB external antenna, you can
obtain a higher DAB broadcast sound
quality. We recommend that you use
the supplied DAB wire antenna only
temporarily until you install a DAB
external antenna.
Connect the supplied DAB wire antenna to
the DAB jack on the unit.
DAB wire antenna
Tip
To install the DAB external antenna (optional),
75
coaxial cable with F male type connector
(optional) will be needed.
Connect the unit to the network.
If you have a network environment,
you can connect the unit to the Internet
through a network cable or to a wireless
LAN using an Ethernet/wireless LAN
media converter. You can easily create a
wireless LAN connection by connecting
a BUFFALO USB wireless LAN adaptor
(WLI-U2-KG54) to a USB connecting
jack on the unit. For details, see “Network
connection and setup” on page 85.
With an Internet connection, you can
enjoy various Internet-based functions
(pages 19, 21, 56, 74 and 99).