NAS-50HDE.GB.2-890-157-
11
(1)
GB
Tips
During recording, a track mark is added whenever
you press the HDD REC
button. Track marks
can only be added for tracks with a minimum
length of 16 seconds.
When “Auto title” is set to “Off”, the recording date
and time will be recorded.
Importing files from a USB storage
device
You can import audio files stored on a USB
storage device to the HDD Jukebox.
1
Enter the Function menu and select
[HDD JUKEBOX].
2
Connect the USB storage device to
the USB connecting jack on the unit.
Refer to the operation manual of the
storage device as well.
3
Enter the Option menu and select
[Import] – [USB storage].
4
If the drive selection display appears,
select the drive.
If the connected USB storage device
has only one drive, the drive selection
display does not appear.
5
Select the albums to be imported.
The selected albums are checked .
You can remove a check mark by
pressing ENTER again.
6
Select [Import].
Notes
You can import a maximum of 10,000 tracks at a
time (page 102).
If two USB storage devices are connected to both
jacks (rear and front) at the same time, the device
connected to the front jack takes priority.
Importing files from a shared folder on
the computer
When the unit is connected to a network,
you can import audio files from shared
folders on your computer to the HDD
Jukebox.
To do this, the folder must be specified as a
shared folder in advance (page 94).
1
Enter the Function menu and select
[HDD JUKEBOX].
2
Enter the Option menu and select
[Import] – [PC shared folder].
3
Select the shared folder by
performing the procedures from 1 to
3 described below.
1
Select one of the following items.
PC name
The computer name or
an IP address (up to 15
letters/numbers)
Share name The shared name that was
entered when the folder
was set to be shared (page
94)
User name The user name that
was used to access the
computer when the folder
was set to be shared
Password
This is needed only when
a password was entered
for the shared folder.
2
Enter the text string that corresponds
with the item selected in step 1.
For details on entering text, see “Entering
text” on page 16.
3
Select [Connect].