![background image](http://html.mh-extra.com/html/sony/giga-juke-nas-50hde/giga-juke-nas-50hde_operating-instructions-manual_420549107.webp)
NAS-50HDE.GB.2-890-157-
11
(1)
10
GB
The unit cannot connect to ADSL.
You may have mixed up the DSL port
and TEL (telephone) port on the splitter
while connecting cables.
Check to see whether the lights on an
ADSL modem and a broadband router
are correctly lit up. Refer to the operating
manuals of the equipments.
Back up
The PC shared folder cannot be found.
If the ICF (Internet Connection Firewall)
function is active, or when commercial
anti virus software is active on your
Windows computer, confirm that the
shared folder on the computer is set to
allow access from the outside. Refer to
the operating manuals of the respective
equipments.
Confirm that the name of the shared
folder on the PC is the same one that was
last backed up.
After performing an incremental back
up operation, the size of the backed up
data is double that of the original.
When the incremental backup was
performed, the clock was incorrectly set
(the clock was set to a time prior to the
time the last back up was performed).
Set the clock correctly and perform an
incremental backup again (page 97).
Perform a full backup operation (page
97).
During the restoration of audio data,
a message similar to the following one
may appear.
[The backup file that you have just been
restored has been subjected to multiple
restorations in the past. In the OpenMG
system, restrictions may be placed on the
restoration of copyrighted materials that
have been restored 4 or more times. This
message appears when the backup file
you are using has been restored 4 or more
times.]
If a restored file becomes invalid due to a
malfunction in a peripheral component
or severe instability in the unit’s system
Consult the local authorized service
facility.
If validation of a file fails even after many
attempts at validations
Check the computer or hard disk
drive containing the backup data for
damage.
Others
The unit works poorly.
The unit may be under the influence
of static electricity or other factors. In
this case, restart the unit. If the unit still
works poorly, reset the unit (page 108).
If any warning message appears, do as the
message says.
Five alphanumeric digits appear in the
display.
The self-diagnosis function has activated
(page 108).
Continued