![background image](http://html.mh-extra.com/html/sony/giga-juke-nas-50hde/giga-juke-nas-50hde_operating-instructions-manual_420549012.webp)
NAS-50HDE.GB.2-890-157-
11
(1)
1
GB
Basic operations
Turning on the power
/
1
Connect the power cord to a wall
outlet.
The unit automatically turns on, makes
the initial settings, and then turns off.
2
Press
/
(power).
The unit turns on.
WARNING
Do not disconnect the power cord while the unit is
making the initial settings. Doing so may cause the
unit to malfunction.
To turn off the power
Press the
/
button on either the remote
control or the main unit. The power may
not turn off immediately. If it does not,
this indicates that the unit is analyzing the
music data on the HDD (hard disk drive)
(see “About 12 Tone Analysis” on page 48).
While the unit is analyzing the music data,
the illumination panel flashes slowly. If you
want to cancel the analysis and turn off the
power immediately, press the
button. If
you want to turn the power back on, press
the
/
button.
Tip
This unit has two starting modes: Quick start-up
mode and Standard start-up mode. See “Setting the
standby mode” on page 95 for details.
Selecting the display language
English, French, German, Italian or
Spanish may be selected for the display
language.
SETUP
/
/
/
/
ENTER
1
Press SETUP.
The Setup menu appears.
2
Press
/
to select [Screen setting]
and press ENTER.
The display for selecting the language
appears.
3
Press
/
to select the desired
language from the [Language] setting
and press ENTER.
Display
Selectable language
English
English
Français
French
Deutsch
German
Italiano
Italian
Español
Spanish
4
Press
/
/
/
to select [Execute]
and press ENTER.
The display appears in the selected
language.
Note
When you change the display language, the input
language (page 16) also changes to the selected
language.
Tip
Refer to “List of input characters” (page 116) to find
out which characters you can use.