NAS-50HDE.GB.2-890-157-
11
(1)
1
GB
Setting up the unit for recording/
importing
HDD REC
HDD REC
/
/
/
/
ENTER
(
for the UK
model)
HDD REC
1
Enter the Option menu for the
respective function and select
[Setting] – [Record].
When the CD function is selected
2
Select the item to be set.
3
Set each item .
In the pull-down menu, select and
set each item (shown in the “List of
settings” below).
4
Select [Close].
List of settings
Format/Bit rate
The following table shows the selectable
audio formats when recording to the
HDD and the respective bit rate (i.e., data
volume).
Format
Bit rate
ATRAC3
66kbps
105kbps
132kbps
ATRAC3plus
48kbps
64kbps
256kbps
Linear PCM
—
MP3
96kbps
128kbps
160kbps
192kbps
256kbps
(
Factory setting)
Monitor sound
When recording an audio CD to the
HDD, you can monitor the sound while
recording. In this case, sound monitoring
also stops when the recording stops.
On
(continue)
Sound monitoring is on
continuously from the first
track.
On
(Intro play)
Sound monitoring is on for
the first few seconds of each
track, from the first track
to the last track. (When
recording moves to the next
track, monitor playback also
moves to the next track.)
Off
Sound monitoring is off.
Recording is carried out
more quickly than when
sound monitoring is done.
(
Factory setting)
